Post by lizbleu on Feb 28, 2021 23:38:07 GMT -5
I partially assembled it and ran into a problem. I assembled it wrong at first. Switched up the L/R legs of the frame, so the wires couldn’t reach where they belonged on the Top part. Upon reassembly, I couldn’t line up the “inside storage containers” holes with the screws. You know how you start with sliding the top part’s hinges into the slots on the leg frame. Then you secure Top part to the frame by connecting it with screws thru the 2 holes on each side of the storage container, on each side of the top part. I got one side done but the screw holes aren’t clearing the plastic parts enough so the screws can go into it, on the other side. I tried and tried: disassembled again to try to loosen up the give- I did that the first time and got it right on the second go, before I discovered I had the legs wrong. But now, nothing seems to matter. The holes don’t clear enough for me to get the screws in straight. Sp- one side is secured by 4 screws, both outside of and inside of the top part. The other side only has 2 screws- outside only. I am done- my patience for hassling with assembly is not good. I fear for my mental health if I keep fighting with it. So, how bad would it be if i just skipped that side? Anyone else have this issue? Any other ways to secure it that anyone’s discovered?
on one of my units.